fbpx

Parts & Accessories

TIG Brush parts and accessories are designed and manufactured to Ensitech’s specifications to ensure complete compatibility with the TIG Brush system. For maximum safety and performance, and to maximize the value of your investment in TIG Brush technology, use only genuine Ensitech accessories and consumables.

Brush Tips
STANDARD BRUSHES AND PROPEL TORCH BRUSHES

Ensitech brush tips are manufactured from premium quality materials to ensure the best performance from the TIG Brush. Brush tips are available in packs of 10.

dual-brush-adaptor
DUAL BRUSH ADAPTOR

Clean larger TIG welds and surfaces more quickly using a dual brush. The dual brush adapter accepts two standard size brush tips to form a brush twice the size for greater coverage.

quad-adaptor
QUAD BRUSH ADAPTOR

The quad brush is designed for cleaning the largest welds and surface areas, as well as heavier-duty applications such as cleaning MIG, which require more heat and current delivered to the work surface. The quad brush adapter accepts four standard size brush tips.

insulating-shrouds
INSULATING SHROUDS

Always use an insulating shroud in accordance with TIG Brush operating instructions. This is important for safety and to prevent damage to the equipment. Replacement shrouds are available for single brush tips (standard with all TIG Brush units), dual brush adapters and quad brush adapters.

wands
WANDS

Stainless steel wand with heat resistant insulating sleeve in 2 sizes: standard 4” and small 2”.

Collet Pack Image
PROPEL TORCH COLLET

Replacement 3 finger collet for PROPEL Torch II

Proper Torch Shroud
PROPEL TORCH SHROUD

Replacement insulating shroud for the PROPEL Torch

extension-cables
EXTENSION CABLES

Extension cables are available to increase reach to 20’, 40’ and 60’, making it easy to use the TIG Brush for less-accessible work. Available individually (red or black cables) or as a pair. Check the maximum length compatible with your TIG Brush.

Cable
HANDLE CABLES

New and Improved Design! Replace the plug, cable or handle as separate units. Cable size has been increased by 60% to 16mm2, to better deliver the output of the world’s most powerful stainless steel surface finishing system.

Clamp
CLAMP CABLES

New and Improved Design! The new design enables the end user to replace the plug, cable or earth clamp as separate units. Cable size has been increased by 60%.

FLEXI HANDLE

Ergonomic flexible handle – with a 360 degree flexible head. Whether you’re cleaning in or around tight pipe angles or branches, or need to clean up inaccessible welds on-site, the unique bendable head allows you to adapt to difficult to reach locations.

Flexi Wand
FLEXI WAND

Screws onto standard straight handle to convert it into a flexi-handle.

PROPEL TORCH

The PROPEL Torch is an ergonomically designed, adjustable weld cleaning torch that gives the TIG Brush user the ability to limit the brush length exposed from the shroud to ensure the brush is used to maximum power and efficiency.

US Office:
sales@tigbrush.com
(630) 405-6440
340 Marshall Ave Bldg 104, Aurora, IL 60506
8:30am – 5:00pm (CST)

Australian Office:
info@ensitech.com.au
+61 2 4735 7700
Ensitech Pty Ltd Unit 1, 144 Old Bathurst Road, Emu Plains NSW 2750
8:30am – 4:30pm (AEDT)

Scroll to Top